Filter
Top Products
5. Adjustment
5.7.9 Input Settings
How to change
1. Click on the Input settings tab.
The input settings values will be displayed
2. Click in the input field of a setting and change the value with the keyboard.
Or,
click on the up or down arrow key to change the value.
3. When the source is Interlaced, check the check box in front of Interlaced.
4. Select Single or dual path.
How to find the correct values for the item in the Input File?
Hor. Total pixels
Active pixels
Vert. Total lines
Active lines
Vert. Start Line
H
or.
li
ne
Frame
Hor. start pixel
Image 5-30
Input file items
Horizontal Total
Pixels
If the value for "Horizontal Total Pixels" is wrong, sampling mistakes (small
vertical bars in the projected image) will be seen in the image.
Select "Total" and adjust the pixel quantity. Adjust for zero bars.
hint: if the number of bars increase, adjust in the other direction.
Active Pixels
The "Active Pixels" : determine the width of the window on the screen. This value
is normally given in the source specifications. If not, adjust until full image is
displayed (no missing pixels).
Horizontal Start
Pixel
number of pixels between the start of the sync signal and the start of the video
information.
36 R5976790 COMMUNICATOR 09/07/2004