Filter
Top Products
4. Projector Setup
To set a pattern
1. Click on one of the predefined icons. (image 4-2)
The selected pattern will be displayed by the projector when the lamp is on and the shutter is open.
The following patterns are available:
- Full screen white
- Full screen green
- Color bars
- Focus
- Outline
- Full screen red
- Full screen blue
- CheckerBoard
- Convergence
-Hatch
Image 4-2
Internal patterns
Command will be send to all write projectors
To clear a test pattern
1. Just click on the Clear button.
Command will be send to all write projectors
4.3 Lamp ON/OFF
Whatcanbedone?
The projection lamp can be switched ON or OFF using the buttons in the software.
16
R5976790 COMMUNICATOR 09/07/2004