Filter
Top Products
5. Adjustment
5. ADJUSTMENT
Overview
• General introduction
• Create a new layout
• Edit an existing layout
• Renaming a layout
• Deleting a layout
•Windowing
• Settings
• Input slot configuration
5.1 General introduction
Overview
With the XLM it is possible to connect up to four sources which can be mixed to one image. Each source
is displayed in a separate window on which z-ordering is possible. The window size, timings and other
settings can be set up for each source independently.
The result image is internally connected to the projector.
Window
A window represents the active area of an input source.
Layout
A layout is a collection of windows. These windows are placed on a certain position within the
screen.
5.2 Create a new layout
How to create
1. Click on Layout file on the menu bar (1). (image 5-1)
The menu drops down.
2. Select Open(1).
An overview window with the existing layout files will be displayed (2).
3. Select a file out of the list (3) and click Open (4) .
The selected layout will be loaded (5).
The selected layout will be loaded on all “write” projectors if this file exists locally on that projector.
4. Change this layout to the desired one.
5. Save this layout into a new file by selecting Layout file → Save as. (image 5-2)
The current active file will be saved to all “write” projectors.
R5976790 COMMUNICATOR 09/07/2004
19