Filter
Top Products
4. Projector Setup
Toggling the lamp status
1. Press lamp on icon ( ).
The lamp will be switched ON. The interface will indicate lamp ON.
2. Press lamp off icon (
).
The lamp will be switched OFF. The interface will indicate lamp OFF.
Command will be send to all “write” projectors
4.4 Shutter Open or Close
Whatcanbedone?
With this function you have full control over the shutter setting. With a single click it is possible to open or
close the shutter.
How to toggle the shutter ?
1. Click on one of the shutter icons to open or close the shutter. (image 4-3)
The status of the shutter is indicated on the interface window.
To open the dowser, click on the open icon (
).
To close the dowser, click on the close icon (
).
Image 4-3
Shutter
Command will be send to all “write” projectors
4.5 Lens shift
Whatcanbedone?
As the lenses for the XLM projector are motorized, it is possible to adjust these lenses via the Communi-
cator.
The image can be shifted horizontally and vertically.
R5976790 COMMUNICATOR 09/07/2004
17