Filter
Top Products
5. Adjustment
5.7.2 Load a file
Howtoloadafile
1. Select a window. (image 5-21)
The input number and the associated file name will be indicated in the settings pain.
2. Click on Input File on the menu bar and select Load [All] (1) or Load [Fit] (1). (image 5-22, image 5-23)
The Open an input file window opens (2).
When the following is selected :
Load file [All] All available files will be displayed in the Open an input file window.
Load file [Fit] Only the best fitting files will be displayed in the Open an input file window.
Or,
push CTRL + L for Load file [Fit] or push CTRL + S for Load file [All].
3. Select the desired file (3) and click on Open (4).
When a system file is selected, the software will ask to create a custom file with the same name, followed
with a next possible index. When OK is selected the settings of the system file will be copied into this
new file. (image 5-24)
The settings of the selected file will be loaded.
Image 5-21
File association
R5976790 COMMUNICATOR 09/07/2004 31