Filter
Top Products
3. Projector Connection
3.2.6 Making connection
What should be done ?
Before a connection can be made with one or more projectors, these projectors should be check.
Making connection
1. Check first the projectors to which the Communicator should make a connection (1). (image 3-7)
2. Click on Connect (2).
When a connection is possible, the connection status will change from Disconnected to Connected (4).
All other tabs of the GUI become enabled and accessible.
Image 3-7
Making a connection
3.2.7 Selecting the Read-Write projector
Read-Write projector
The read-write projector is the projector from
which the settings are loaded (monitored) in the Communi-
cator software. These settings can be adapted and used to control all write projectors.
How to select ?
1. Click on the name of the projector which must become the read-write projector.
The background changes to dark grey.
3.3 Serial Network Connection
Physical connection
Connect a serial cable from PC to the RS232IN connector of the projector.
R5976790 COMMUNICATOR 09/07/2004
11