AT&T PPC4100 GPS Receiver User Manual


 
265264
If the device lapses into sleep mode, allow ample time
before turning it back on to allow for a smoother power
mode transition. The device wakes up from sleep mode
when any of the following events occur:
- The Power button or the volume rocker key is
pressed.
- The Send or End buttons are pressed.
- The device is docked into the cradle.
- A storage card is inserted into the SD/MMC slot.
- A call is received by your device.
- A preset alarm event is activated.
!
Turn off sounds you don’t need.
Your device emits sounds in response to a number of
events, such as warnings, reminders, and screen taps or
hardware button actions. Optimize battery life, by turning
off any sounds you don’t need.
1. Tap ,
SSeettttiinnggss
, then
PPeerrssoonnaall
tab.
2. Tap
SSoouunnddss && NNoottiiffiiccaattiioonnss
.
3. Clear the check boxes on both the Volume and
Notifications tabs.
!
Disable the phone function when no SIM card is
installed on your device.
PPAASSSSWWOORRDD PPRROOBBLLEEMM
FFoorrggootttteenn ppaasssswwoorrdd
If you forget your password, you’ll need to clear your
device’s memory by hard resetting it. For instructions,
see page 22.
BBaatttteerryy lloosseess ppoowweerr
When the main battery is low, you will see a low battery
icon (see “Status Icons” on page 44) in the navigation
bar and a callout that tells you to recharge the battery as
soon as possible. Your device uses both a detachable
main battery pack and an embedded backup battery
cell. When the main battery pack is removed or is
completely drained out, your device will shutdown. The
backup battery cell will then have 30 minutes to retain
data after which you risk losing all data on the internal
memory of your device.
Tips on ho
w to make battery charge last longer
To make your battery charge last as long as possible,
observe the guidelines listed below.
!
Use external power whenever possible.
Use the AC adapter to plug your device into external
power whenever possible, especially when:
- Establishing a remote connection
- Using the backlight
- Watching/listening to audio and video files
- Connecting to a computer and/or server
!
Shorten auto suspend time.
While on battery power, your device automatically
suspends operation if you haven’t touched the hardware
buttons or used the stylus for a specified period of time.
Maximize battery life by shortening this time.
1. Tap ,
SSeettttiinnggss
, then
SSyysstteemm
tab.
2. Tap
PPoowweerr
.
3. On the Control tab, adjust the setting on the
“On battery power” pick list.