Filter
Top Products
1918
The following sections describe various system
procedures that will help you use the device more
efficiently.
RREECCAALLIIBBRRAATTIINNGG TTHHEE SSCCRREEEENN
When you first startup your PPC4100, you will be asked
to calibrate the screen by tapping the center of a cross
with your stylus as it moves around the screen. This
process ensures that when you tap the screen with your
stylus the item tapped is activated. If, however, while
using your device, you discover tapping an item doesn’t
bring up the appropriate response, it means your device
has lost its calibration.
T
o recalibrate the screen:
1. Launch the Align Screen window by doing either of the
following:
!
Software launching
a. Tap , then Settings.
b. On the System tab, tap Screen .
c. On the Screen window, tap
AAlliiggnn SSccrreeeenn
.
!
Hardware launching
Simultaneously press the
PPoowweerr
button and the
jog dial.
2.Tap the center of the cross with your stylus as it moves
around the screen.
SSYYSSTTEEMM PPRROOCCEEDDUURREESS
SSYYSSTTEEMM PPRROOCCEEDDUURREESS
SSTTAARRTTIINNGG UUPP TTHHEE HHAANNDDSSEETT
After initially charging your device for about eight (8)
hours it is ready to be used. You can now start up your
device where you’ll calibrate the display, learn some
basic stylus usage, and set up the system date and time.
T
o star
t up your PPC4100:
1. Turn on your device by pressing the
PPoowweerr
button
on the front panel.
2. Follow the onscreen instructions on the Welcome
Screen Wizard.