Filter
Top Products
82
English
Advanced
Operation
Changing Display Mode
The following explanation shows how to view
the various security and convenience
information found in the SEC-8349 Security
Display Module.
Turn the ignition switch to the ON position.
The clock display will appear on the display.
Turn the Disarm/Valet switch to the ON
position.
Press the MODE button within 10 seconds.
Each press of the button will advance the
mode as follows:
→ DATE/TIME SETUP → TRIPPED
SENSOR SETUP → FAULTY SENSOR
INDICATION → SECURITY PROGRAM-
MING → VALET INFORMATION → BAT-
TERY CHECK →
Note: Turning the Disarm/Valet switch ON
while displaying one of the aforemen-
tioned modes, will result in a return to
the clock display. The Clock display
will return after 30 seconds of inactiv-
ity.
1
2
3
ACC
OFF
ON
RUN
VALET