Alpine SEC-8345 Automobile Alarm User Manual


 
42
English
Basic Operation
Remote Control
Protected Valet
When the system is placed into valet through
the SEC-8463 Remote Control, all sensors
are inactive except the hood/trunk sensor.
This is ideal when the car is being valet
parked or washed because the hood and
trunk will be protected from any prying eyes
or hands. However, because the siren will
sound if these sensors are tampered with,
this valet mode is NOT RECOMMENDED
when the car is being serviced. The
protected valet feature can be accessed with
the ignition on or off.
Placing the System in
Protected Valet:
Press and hold the EXT1/VALET button for at
least 2 seconds (when the system is
disarmed and the ignition is OFF).
The Extension LED will illuminate for 2
seconds, indicating that the system is now in
valet.
Extension LED
Témoin d'extension
Indicador de extensión
2
1
EXT 1
VALET