Alpine SEC-8345 Automobile Alarm User Manual


 
136
English
English/Français/Español
Function Setup
Programmable Features
Off: Any triggered sensor will cause
the system to enter alarming
mode.
On: Both Impact and Radar sensors
must be detected at the same
time in order to trigger an
alarming mode. Doors and hood/
trunk instantly trigger an alarm
mode regardless of Sensor Scan
status.
On: Siren sounds during the alarming
state.
Off: Siren does not sound during the
alarming state.
Off: All doors will unlock at the same
time.
On: The driver’s door will unlock first,
then, when the TX/PANIC button
is pressed a second time within 5
seconds, all other doors will
unlock.
Note: When the Ignition Unlock function is
set to ON, do not press the TX/PANIC
button within 5 seconds after setting
the ignition to OFF. If pressed, all the
doors will be unlocked.
Off: Impact Pre-Warn is turned off.
On: Impact Pre-Warn chirps are
turned on.
On: Turns on Warning and Pre-Warn
chirps.
Off: Turns off Warning and Pre-Warn
chirps.
16.Sensor Scan (Off/On)
Vérification des capteurs (Désactivée/
Activée)
Exploración de sensor (Desactivada/
Activada)
17.Siren (On/Off)
Sirène (Activée/Désactivée)
Sirena (Activada/Desactivada)
18 Priority Unlock (Off/On)
Priorité de déverrouillage (Désactivée/
Activée)
Prioridad de desbloqueo (Desactivada/
Activada)
19.Pre-Warn (Off/On)
Préavertissement (Désactivé/Activé)
Prealarma (Desactivada/Activada)
20.Warning Chirp (On/Off)
Signal d’avertissement (Activé/
Désactivé)
Sonido de alarma (Activado/
Desactivado)