Alpine SEC-8345 Automobile Alarm User Manual


 
78
English
Advanced
Operation
Impact Sensor
Adjustment Mode
Remove the key from the ignition.
Turn the Disarm/Valet switch ON and hold it
for two seconds. The Extension LED will glow
for 1 second.
Press and release the TX/PANIC and EXT1/
VALET buttons simultaneously.
(The Radar sensor adjustment mode is on.)
The system will enter exterior radar sensor
adjustment mode.
Turn the Disarm/Valet switch ON and hold it
for two seconds. The siren will "chirp" one
time.
(The Impact sensor adjustment mode is on.)
"IMPACT SENSOR ADJUSTMENT MODE"
is scrolling on the Security Display Module.
The system is in Pre-Warn (P-WA) impact
sensor adjustment mode.
The TX/PANIC button will increase the
sensitivity while the EXT1/VALET button
decreases the sensitivity. A number from 1 to
30 will appear representing the level of
sensitivity. The greater the number, the
greater the sensitivity. When finished
adjusting the impact pre-warn level, proceed
to step 6 .
TX/PANIC button: UP
EXT1/VALET button: DOWN
1
2
VALET
3
4
VALET
ACC
OFF
ON
RUN
5
and/et/y
TX
PANIC
EXT 1
VALET
TX
PANIC
EXT 1
VALET
or/ou/o