Alpine SEC-8345 Automobile Alarm User Manual


 
14
English
Basic Operation
Remote Control
Transmitter
Two Five-Button Remote Control Transmit-
ters (part number SEC-8463) are provided
with the SEC-8063 Security System. The
SEC-8463 Remote Control allows the
arming, disarming, panicking, and EXT
activation of the SEC-8063 Security System
from a remote location. In addition, the SEC-
8463 will also allow you to control a second
security system.
Following is a brief description of the
functions of each of the components of the
remote control transmitter:
1 LED indicator
The three-color LED will illuminate when
the signal is being transmitted.
2 TX/PANIC button
Press this button to:
1. Arm and Disarm the system.
2. Panic the system.
3 EXT1/VALET button
Press this button to:
1. Activate the EXT-1 output.
2. Place the system in Valet mode.
4 EXT2/EXT3 button
Press this button to:
1. Activate the EXT-2 output.
2. Activate the EXT-3 output.
5 EXT4 button
Press this button to:
Activate the EXT-4 output.
6 MODE Button then TX Button
Press the MODE button followed by the
TX button (within 5 seconds) to silently
Arm and Disarm the system.
Notes:
Consult your Alpine dealer to determine if
your second security system is compatible
for two car operation.
Do not expose to rain or water.
Do not drop or apply shock.
TX
PANIC
EXT 4
EXT 2
EXT 3
EXT 1
VALET