Alpine SEC-8345 Automobile Alarm User Manual


 
140
English
English/Français/Español
EXT Setup
Programmable Features
1 sec: Pressing EXT1 or EXT2 button
sends an output for 1 second.
Latched: Pressing EXT1 or EXT2 button
enables the output until disabled
when the button is pressed again.
T-timer: Pressing the EXT1 or EXT2
button starts the timed EXT
Output. The time can be set for 0,
15, 30, 45 seconds, or 1 – 10
minutes.
Cont: Pressing and holding the EXT3
button will transmit as long as the
button is held down.
1 sec: Pressing EXT3 button sends an
output for 1 second.
1 sec: Pressing EXT4 button sends an
output for 1 second.
Cont: Pressing and holding the EXT4
button will transmit as long as the
button is held down.
Latched: Pressing MODE button enables
the output until disabled when the
button is pressed again.
1sec: Pressing MODE button sends an
output for 1 second.
1. Ext-1 (1 sec/Latched/T-timer)
Ext-1 (1 sec/enclenché/Temporisation
T)
Ext-1 (1 seg./Bloqueado/Temporizador
T)
2. Ext-2 (1 sec/Latched/T-timer)
Ext-2 (1 ssec/enclenché/Temporisation
T)
Ext-2 (1 seg./Bloqueado/Temporizador
T)
3. Ext-3 (Cont/1sec)
Ext-3 (Cont/1sec)
Ext-3 (Cont/1 seg.)
4. Ext-4 (1 sec/Cont)
Ext-4 (1 sec/Cont)
Ext-4 (1 seg/Cont)
5. Ext-5 (Latched/1sec)
Ext-5 (Enclenché/1 sec)
Ext-5 (Bloqueado/1 seg.)