Filter
Top Products
Chapter 1 ATCA-C110/1G Baseboard Preparation and Installation
ATCA-C110/1G Installation and Use Manual
23
REVIEW COPY
You may access the standard serial console port via the ARTM-C110. This serial port serves
as the U-Boot and operating system (OS) console port. Refer to Chapter 3, U-Boot Firmware
Overview, for information on configuring the U-Boot. The console should be set up as follows:
Table 1-4. ATCA-C110/1G Onboard Connectors
Connector Function
J1 Zone 1 Connectors
J20, J21, J22 and J23 Zone 2 Connectors
J30, J31 and J32 Zone 3 Connectors
J1, J2, J3, J4 FIM Connectors
J38, J39, J40, J41 AMC Connectors
Table 1-5. Serial Port Configuration Parameters for MPC8540
Parameter Setting
Baud rate 115200
Data bits 8
Parity No parity
Stop bits 1
Flow control None