Filter
Top Products
Appendix B Specifications
ATCA-C110/1G Installation and Use Manual
93
REVIEW COPY
EMC Compliance
The ATCA-C110/1G was tested in an EMC-compliant chassis and meets the requirements for
EN55022 Class A equipment. Compliance was achieved under the following conditions:
■ Shielded cables on all external I/O ports
■ Cable shields connected to earth ground via metal shell connectors bonded to a conductive
module front panel
■ Conductive chassis rails connected to earth ground. This provides the path for connecting
shields to earth ground
■ Front panel screws properly tightened
For minimum RF emissions, it is essential that the conditions above be implemented. Failure to
do so could compromise the EMC compliance of the equipment containing the board.