Filter
Top Products
ATCA-C110/1G Installation and Use Manual
Appendix B Specifications
90
REVIEW COPY
Table B-1. ATCA-C110/1G Environmental Specifications
Characteristics Specifications
Environmental Parameters
A minimum of 300 LFM (linear feet per minute) of forced air cooling is recommended for operation
in the higher temperature ranges.
Temperature range 0 to 55°C Operating
–40°C to 85°C Non-Operating
Temperature change +/-5°C per minute Operating
+/-1°C per minute Non-Operating
Relative humidity 5% to 95% at 40°C Operating
(non-condensing)
5% to 95% at 40°C Non-Operating
(non-condensing)
Altitude –300 m to 3000 m Operating
–300 m to 12000 m Non-Operating
Shock 5g/11 ms half sine Operating
15g/11 ms half sine Non-Operating
Vibration 10 Hz to 15 Hz: 2 mm amplitude Operating
15 Hz to 150 Hz: 2 g
10 Hz to 15 Hz: 5 mm amplitude Non-Operating
15 Hz to 150 Hz: 5g
Packaging free fall 100 mm/3 axis Operating
1200 mm/all edges and corners Non-Operating
MTBF (Mean Time Between
Failures)
a
a. The following are the standard conditions for MTBF calculation:
• Non-mobile operation
• Ground benign (Gb)
• 40°C mean ambient temperature
• No fans used
• Continuous operation at 8,760 hours per year
347,826 hours
Physical Dimensions
8U Board Height 322.25 (12.68”)
Length 280 mm (11.02”)
Front panel height 351.00 mm (13.82”)
Front panel width 30.48 mm (1.2”)