Filter
Top Products
ATCA-C110/1G Installation and Use Manual
Chapter 1 ATCA-C110/1G Baseboard Preparation and Installation
10
REVIEW COPY
Step 3:Firmly insert the SO-DIMM into the socket at a 45° angle in the direction as indicated in Figure
1-6. Push the SO-DIMM down until the retaining clip of the socket locks the SO-DIMM into
position.
Step 4:The fully installed SO-DIMM in its socket is shown in Figure 1-7.
Figure 1-6. Inserting SO-DIMM
45 Angle
0
Figure 1-7. Inserted SO-DIMM locked into position