Filter
Top Products
B
ATCA-C110/1G Installation and Use Manual
89
REVIEW COPY
B Specifications
Specifications
This appendix provides general mechanical, environmental and electrical specifications for the
ATCA-C110/1G.
Environmental and Physical Specifications
The ATCA-C110/1G features the industry-standard ATCA form factor.
The conditions listed below refer to the surroundings of the board within the user environment.
In order to meet the environmental requirements, the ATCA-C110/1G has to be tested in the
system where it is to be installed. Before powering up the board, calculate the power needed
according to the combination of board upgrades and accessories.
Note Operating temperatures refer to the temperature of the air circulating around the board
and not to the component temperature. The Fabric Interface Module is designed to work in
conjunction with the ATCA-C110/1G carrier board and will comply with the specifications of the
carrier board.
!
Caution
Board Damage
Do not operate the product outside the specified environmental limits. High humidity,
temperature and condensation may cause short circuits.
Therefore, ensure that the product is completely dry and there is no moisture on any
surface before applying power.
!
Caution
Board Damage
Do not operate the product outside the specified environmental limits. High humidity,
temperature and condensation may cause short circuits.
Therefore, ensure that the product is completely dry and there is no moisture on any
surface before applying power.