Filter
Top Products
About This Manual
ATCA-C110/1G Installation and Use Manual
xxi
REVIEW COPY
Use ESD
Wrist Strap
Before you install or remove a board Motorola strongly recommends that you use an
antistatic wrist strap and a conductive foam pad.
!
Warning
Identifies any risk of personal injury or loss of life and should explicitly state the nature
of the risk and specify how to reduce or avoid the risk.
Terms and Abbreviations
This document uses the following terms and abbreviations:
Term Definition
ADC Analog to Digital Converter
AMC Advanced Mezzanine Card
ARTM AdvancedTCA Rear Transition Module
ATCA Advanced Telecom Computing Architecture
BIB Board Information Block
CL CAS Latency (for SDRAM)
CLI Command Line Interface
COP Control and Observation Port (PowerPC JTAG debug port)
CPLD Complex Programmable Logic Device
CPU Central Processing Unit
DMA Direct Memory Access
DRAM Dynamic Random Access Memory
E
2
PROM Electrically Erasable Programmable Read Only Memory
FEC Fast Ethernet Controller
FIM Fabric Interface Module
GbE Gigabit Ethernet
GPCM General Purpose Chipselect Machine
I/O Input/Output
I
2
C Inter-Integrated Circuit Bus
IPMB Intelligent Platform Management Bus
IPMC Intelligent Peripheral Management Controller (also referred to as the IPMI Controller)
IPMI Intelligent Platform Management Interface
JTAG Joint Test Action Group; test interface for digital logic circuits
LED Light-Emitting Diode