• For a VLAN interface, enter the keyword vlan then a
number from 1 to 4094.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Added support for VRF. Introduced on the S6000-ON.
9.2(0.2) Introduced on the Z9000.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
6.3.1.0 Introduced.
default-information originate
Generates a default route into an IS-IS routing domain and controls the distribution of default
information.
Syntax
default-information originate [always] [metric metric] [route-
map map-name]
To disable the generation of a default route into the specified IS-IS routing domain,
use the no default-information originate [always] [metric metric]
[route-map map-name] command.
Parameters
always (OPTIONAL) Enter the keyword always to have the default
route always advertised.
metric metric (OPTIONAL) Enter the keyword metric then a number to
assign to the route. The range is from 0 to 16777215.
route-map
map-name
(OPTIONAL) A default route the routing process generates if
the route map is satisfied.
Defaults Not configured.
Command
Modes
• ROUTER ISIS (for IPv4)
• CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Intermediate System to Intermediate System (IS-IS)
851
