The show ip bgp command displays the dmzlink-dw details only if dmzlink-bw is
enabled using the bgp dmzlink-dw command.
Example
Dell#show ip bgp
BGP local RIB : Routes to be Added 0, Replaced 0, Withdrawn 0
BGP local router ID is 192.168.11.5
Status codes: s suppressed, S stale, d dampened, h history, *
valid, > best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf
Weight Path
*> 55.0.0.0/24
172.16.0.2 0 200 i
*> 66.0.0.0/24
172.16.0.2 0 200 i
All the show and debugs commands display the link band width extended-
community prefixed with DMZ-Link-bw along with other extended communities.
Dell#show ip bgp 3.3.3.0/24
BGP routing table entry for 3.3.3.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
1.1.1.2 (3.3.3.1) Best
AS_PATH :
Next-Hop : 1.1.1.2, Cost : 0
Origin IGP, Metric 0, LocalPref 100, Weight 0, internal
Extended Communities :
DMZ-Link Bw: 2000 kbytes*
Related
Commands
show ip bgp community — views the BGP communities.
neighbor maximum-prefix — controls the number of network prefixes received.
show ip bgp cluster-list
View BGP neighbors in a specific cluster.
S6000
Syntax
show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6
unicast] cluster-list [cluster-id]
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf and then the name of
the VRF to view cluster information of BGP neighbors
corresponding to that VRF.
ipv4 multicast (OPTIONAL) Enter the keywords ipv4 followed by the
keyword multicast to view information related only to ipv4
multicast routes.
418
Border Gateway Protocol
