Defaults The internal flash is the default directory.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Usage
Information
After you enable FTP server functions with the ftp-server enable command,
Dell Networking recommends specifying a top-level directory path. Without a top-
level directory path specified, the Dell Networking OS directs users to the flash
directory when logging in to the FTP server.
Related
Commands
ftp-server enable — enables FTP server functions on the E-Series.
ftp-server username — sets a username and password for incoming FTP
connections to the E-Series.
ftp-server username
Create a user name and associated password for incoming FTP server sessions.
Syntax
ftp-server username username password [encryption-type]
password
To delete a user name and its password, use the no ftp-server username
username
command.
Parameters
username Enter a text string up to 40 characters long as the user name.
Control and Monitoring
105
