Volvo VHD Automobile User Manual


 
General Information 17
Identification and Certification Labels
There are two labels that are located on the
rear, lower face of the driver side door
frame. These should be part of the vehicle
at all times.
The VIN is shown on the Vehicle Identifi-
cation label. The VIN includes the vehicle
make, model series, weight class, engine
model, where the vehicle was built and the
vehicle serial number. This label also
shows the truck model designation, major
component model and serial number, cab
model and serial number, cab and chassis
paint colors, and color numbers.
On the upper part of the door frame is the
Certification label showing the axle and
load ratings for the vehicle as it was built.
Do not exceed these ratings by overloading.
NOTE! To deter tampering with the origi-
nal build information, the information on
the label will be destroyed if label is
removed. If for any reason a label is dam-
aged, contact your Volvo Truck dealer for a
replacement.
W0001210
Noise Emission Control Label
A Noise Emission Control label is located
in the rear of the door frame. It is the
Owner’s responsibility to maintain the vehi-
cle so that it conforms to EPA regulations.
Refer to page 14 for a listing on what con-
stitutes tampering with the Noise Emissions
Control.