Filter
Top Products
52 Additional Safety Features
The retractor web storage device is
mounted on the B-pillar, just behind the
door in the cab. The retractor is the heart of
the safety belt system and can be damaged
if abused, even unintentionally. Check the
retractor web storage device operation to
ensure that it is not locked and that it spools
out and retracts the webbing properly.
W8002481
If tethers are being used to anchor the
safety belts to the floor, make sure that they
are properly attached to the seat. Tethers
must also be inspected for web wear and
proper tightness of mounting hardware.
W8001387
All hardware for safety belt mounting
points should be evaluated for corrosion.
All attachment points of the system should
be checked for tightness of mounting
hardware.
Check the web in areas exposed to ultra-
violet rays from the sun or extreme dust or
dirt. If the original color of the web in
these areas is extremely faded, the physical
strength of this web may have deteriorated.
If this condition exists, replace the safety
belt system.