Filter
Top Products
Instruments and Controls 99
Driving and Fog Lights (option)
Combinations of driving and fog lights can
be mounted in standard locations in the
aerodynamic bumper or from the underside
of the steel bumper. These are operated by
a switch next to the headlight switch.
Fog and driving lights are wired so they are
turned on only when the headlight switch is
on. Fog lights are used with the parking
lights and the low beam headlights. Driving
lights are used with the high beam head-
lights. Switching from low to high beam
will automatically switch from fog lights to
driving lights.
Driving and fog lights should be used when
driving conditions require additional light-
ing. The driving or fog lights should n
ot be
used in traffic where they might distract
other drivers thereby creating a safety haz-
ard.
If the fog/driving lights are added to the ve-
hicle as an accessory later on, make sure the
light controls are wired as described above.
W3001356