Filter
Top Products
92 Instruments and Controls
Windshield Wiper/Washer
The wiper/washer functions are operated by
the same switch. The wipers have a normal
and a fast speed which are activated by
moving the lever down one or two posi-
tions. To let the wipers engage for one or
two passes, lightly depress the lever until
the wipers start and hold it there. The
wipers return to the parking position when
the lever is released.
The interval wiper function is engaged by
moving the lever up. The normal pro-
grammed speed is one pass every 10
seconds. To shorten the interval time, move
the lever to normal wipe position and then
to the interval position again when the next
wiper pass is desired. In this way, the inter-
val can be programmed between 1 to 10
seconds between each pass.
W3003655
To operate the windshield washer, pull the
lever toward the steering wheel. If washer
fluid needs to be added, use a commercially
reputable washer fluid that has good clean-
ing capability and does not freeze in cold
weather. Total reservoir capacity is 3.3 gal-
lons (12.5 liters).
W8000985
An indicator will appear on the graphic dis-
play and the yellow
INFO telltale lights
up when there is approximately 1.4 gallons
(5.3 liters) remaining in the reservoir. A 10
second activation delay allows for fluid
slosh.
T3008838