Filter
Top Products
162 Graphic Display
Ignition key in the off position
When the ignition key is in the OFF posi-
tion, if setting the alarm clock takes more
than 30 seconds, the time which has been
entered then applies.
Switch off the alarm clock
When the alarm clock goes off, the word
ALARM flashes, the current time is shown
and a warning signal sounds. The alarm is
switched off after 60 seconds or when the
up, down, Esc or SELECT control button is
pressed.
Activate alarm clock (without changing the time of the alarm call)
1 The cursor is moved with the up/down
buttons to ON.
2 SELECT activates the alarm clock and
the symbol is shown on the graphic
display.
Cancel setting
Press Esc in order to cancel the setting.
ALARM 08:30 AM
T3008833
CLOCK 08:00 AM
ON OFF SET
De-activate the alarm clock
1 The cursor is moved with the up/down
buttons to OFF.
2 SELECT switches off the alarm clock
and the symbol disappears from the
graphic display.
Cancel setting
Press Esc in order to cancel the setting.
ALARM 08:30 AM
CLOCK 08:00 AM
ON OFF SET