Filter
Top Products
52
Note: You need not open Itinerary if you run into a roadblock or trafc jam. To get an
immediate alternative route use the Bypass function of Recalculate (Page 49).
Note: When you use this feature, Uniden Navigation will keep on excluding the same
part of the map from later routes until you manually delete the route (Page 50), or
restart Uniden Navigation.
Note: When you use this feature, Uniden Navigation will keep on excluding the same
part of the map from later routes until you manually delete the route (Page 50), or
reset the device.
4.7.3.4 Fly Over
This feature has no navigation function, it merely provides a quick view of the
route. It will present a simulation of the route showing what you will see later when
navigating.
There are two possibilities for running the simulation.
Fast Fly Over
Tap Fly Over to quickly run through the route. Uniden Navigation will y the route in
Cockpit mode at high speed to give you a rough overview of the route events. Uniden
Navigation is tweaked to give you a smooth and easy-to-follow playback even at this
speed.
This mode is useful if you want to have a look at the route before you start your
journey. Tap anywhere on the screen to stop the simulation.
Lifelike simulation
An alternative way to do a Fly Over is to press and hold the rst hardware button (Tilt
down) and tap the Fly Over button.
In this mode the simulation is run at normal speed (using the speed limit of the streets
and roads in the route), and voice instructions are also played.
This mode is mainly useful for demonstrating Uniden Navigation, or to learn the way
it works before your start your rst journey.
4.7.3.5 Edit
Tap Edit to see the list of all points used in the route. The rst item in the list is the
departure point of the route without a valid GPS position, the last reached via point
if you open the list during navigation, or the point where Uniden Navigation most
recently recalculated the route. This means the list is permanently updated, and via
points drop out during the journey. The last item in the list is your nal destination.