Filter
Top Products
30
4.5.2 Zoom in and out (No. 2 & 3)
These semi-transparent buttons are only displayed if “Zoom & Tilt” is enabled in the
Quick menu (Page 42).
Zoom will change the scale of the map. Zoom out shows a larger part of the map,
while Zoom in shows a smaller part of the map in more detail.
The automatic Smart Zoom function will do the necessary zooming for you when
navigating (zooms out if the next turn is at a distance to let you see far ahead
and zooms in when approaching a turn to give you a better view of the upcoming
manoeuvre). If you manually change the zoom level, Smart Zoom will no longer scale
the map by itself (automatic tilting and rotating remains active).
You need to tap the Lock button (Page 30) to return the zoom control to Smart Zoom.
If you are on the Cockpit screen, Uniden Navigation will do this automatically if you
leave the display untouched for 30 seconds.
4.5.3 Tilt up and down (No. 4 & 5)
These semi-transparent buttons are only displayed if “Zoom & Tilt” is enabled in the
Quick menu (Page 42).
This function modies the vertical viewing angle of the map in 3D mode. You
can change the angle in a wide range starting from a top down view (2D view is
seamlessly integrated) all the way to a at view that lets you see far ahead.
The automatic Smart Zoom function will do the necessary tilting for you when
navigating (gives a at view if the next turn is at a distance to let you see far ahead
and raises the angle when approaching a turn to give you a better view of the
upcoming manoeuvre). If you manually change the view angle, Smart Zoom will no
longer tilt the map by itself (automatic zooming and rotating remains active).
You need to tap the Lock button (Page 30) to return the tilt control to Smart Zoom. You
can also set Uniden Navigation to do this automatically after a few seconds (Page
68).
4.5.4 Lock to GPS position and heading (No. 6)
This semi-transparent icon is displayed if GPS position is available, and the map has
been moved. It also appears when you scale or tilt the map.