Filter
Top Products
Operation
20221032B 39
To unlock the locked remote units, you have to take control from
the master unit by quickly double-pressing its
STBY
(STBY)
button.
2.13 External system selection
RUDDER
02
340.
7
Gyro1
Disengaged
An external system selector can be used to change from
automatic to manual steering and vice versa (refer to IMO
resolution MSC.64 sec.4). The selector switch must adequately
indicate which method of steering is in operation at any given
moment. When manual steering is selected, the AP50 will be
disconnected from the vessel’s steering system and show
“Disengaged” on the display (no mode indicators are lit on the
FU50). When automatic steering is selected, the AP50 will go to
AUTO mode (or AUTO-WORK mode). For connection of an
external system selector switch, refer to “System Select”, on
page 87.
2.14 User Set-up Menu
NAV
SETUP
NAV
SETUP
In the AP50, the STANDBY, AUTO, and NAV modes have a
User Set-up menu with adjustable settings. You can easily reach
the set-up menus by a quick double press on the
NAV
SETUP
(NAV)
button from the mode you are currently in. Move through the
menu items by pressing the Port and Starboard buttons. Use the
course knob to change a value.
Alternating Course Knob Icon
When the course knob is used for settings in the User Set-up
menu, an icon will alternate on the screen to tell that no course
changes can be made unless you press the
AUTO
(AUTO) button.
STANDBY Mode
340.7
Gyro1
SETUP
Move : ,
Adjust :
Backlight
Contrast
Steering function
Rudder
Speed Log 04.9kt
Speed source Log
Steer compass Gyro1
Monitor comp. Flux1
Nav source GPS1
Backlight
The brightness of the backlight of the display and buttons may
be adjusted (10 grades, 10 = brightest). The setting is stored
when the system is turned off and resets to the stored level when
turned on. Adjustment is local to the control unit you adjust.
Contrast
The contrast of the display may be adjusted (10 grades, 10 =
highest contrast). The setting is stored when the system is turned
off and resets to the stored level when turned on.