Filter
Top Products
= For details, refer to Using the
“Function” menu on page 94.
3 Display the DVD menu
You can display the menu by touching [Menu]
or [TOP M.] while a disc is playing. Touching
either of these keys again lets you start play-
back from the location selected from the
menu. For details, refer to the instructions pro-
vided with the disc.
4 Skip forward or backward
Touching[p] skips to the start of the next
chapter. Touching [o] once skips to the
start of the current chapter. Touching it again
will skip to the previous chapter.
p Moving MULTI-CONTROL left or right
enables you to perform the equivalent
operations.
5 Playback and Pause
Touching[f] switches between “playback”
and “pause”.
6 Switch the display
Touching[Disp] changes the indication on the
information plate as follows:
Disc information display — Repeat range and
L/R select display
7 Display the map screen
8 Display the DVD menu keypad
= For details, refer to Using DVD menu by
touch panel keys on page 94.
9 Switch next page of touch panel keys
a Stop playback
b Hide the touch panel keys
Touching[Hide] hides the touch panel keys.
Touchanywhere on the LCD screen to display
the touch panel keys again.
c Skip the title forward or backward
Touching[d] skips to the start of the next title.
Touching[c] skips to the start of the previous
title.
d Frame-by-frame playback (or slow-motion
playback)
= For details, refer to Frame-by-frame play-
back on page 94.
= For details, refer to Slow motion playback
on page 94.
e Fast reverse or forward
Touch[m]or[n] to perform fast reverse or
forward.
If you touch and hold [m]or[n] for five
seconds, fast reverse/fast forward continues
even if you release either of these keys. To re-
sume playback at a desired point, touch
[f], [m]or[n].
f Searching for a desired scene and starting
playback from a specified time
p For details, refer to Searching for a speci-
fic scene and starting playback from a
specified time on the next page.
g Perform an operation (such as resuming)
that is stored on the disc
When using a DVD that has a point recorded
that indicates where to return to, the DVD re-
turns to the specified point and begins play-
back from that point.
h Change the subtitle (Multi-subtitle)
Each touch of [S.Title] switches between the
subtitle languages.
i Change the viewing angle (Multi-angle)
Each touch of [Angle] switches between view-
ing angles.
p During playback of a scene shot from
multiple angles, the angle icon
is
displayed. Turn the angle icon display
on or off using the “DVD Setup” menu.
= For details, refer to Setting the angle icon
display on page 104.
j Change audio language and audio sys-
tems (Multi-audio)
Each touch of [Audio] switches between
audio languages and audio systems.
p DTS audio cannot be output, so select
an audio setting other than DTS.
p Display indications such as MPEG-A
and Mch indicate the audio system re-
corded on the DVD. Depending on the
setting, playback may not use the same
audio system as that indicated.
k Entering the numerical commands
= For details, refer to Direct number search
on the next page.
Playing a DVD-Video
En
92
Chapter
11