Pioneer AVIC-X7115BT GPS Receiver User Manual


 
3 Touch [OK].
Data on the selected item is cleared from this
navigation systems memory.
p If you do not want to clear memory that you
have selected, touch [Cancel].
Setting the phone
Setting the phone volume
The volume level for hands-free phoning can
be adjusted.
1 Touch [Phone Volume] on the Phone
Menu.
= For details, refer to Displaying the Phone
Menu on page 73.
2 Adjust volume to touch the sliders of
[Phone Ringtone] and [Phone Voice].
[Phone Ringtone]:
This setting controls the incoming ring tone
volume.
[Phone Voice]:
This setting controls the incoming voice vo-
lume.
p Phone volume varies depending on the in-
coming caller's phone, volume setting and
other conditions.
= For details concerning operations, refer
to Answering an incoming call on page
77.
Stopping Bluetooth wave
transmission
You can stop transmission of electric waves by
turning off the Bluetooth function. If you do
not use the Bluetooth wireless technology, we
recommend selecting [Off].
1 Touch [Phone Settings] on the Phone
Menu.
= For details, refer to Displaying the Phone
Menu on page 73.
2 Touch [Off] next to Bluetooth On/Off.
Touching [Bluetooth On/Off] switching be-
tween [On] and [Off].
Answering a call automatically
The navigation system automatically answers
incoming calls to the cellular phone, so you
can answer a call while driving without taking
your hands off the steering wheel.
1 Touch [Phone Settings] on the Phone
Menu.
= For details, refer to Displaying the Phone
Menu on page 73.
2 Touch the key next to [Auto Answer
Preference].
Auto Answer Preference selection appears.
3 Touch the desired option.
[Off]: No automatic response. Respond manu-
ally
[Immediately]: Answers immediately
[After 3 seconds]: Answers after three sec-
onds
Using hands-free phoning
En
82
Chapter
08