Pioneer AVIC-X7115BT GPS Receiver User Manual


 
The term external unit refers to future
Pioneer devices that are not currently planned
for, or to devices that allow control of basic
functions although they are not fully con-
trolled by the navigation system. Two external
units can be controlled by this navigation sys-
tem. When two external units are connected,
the navigation system allocates them as exter-
nal unit 1 or external unit 2.
For details of the connection method, refer to
Installation Manual.
For details concerning operation, refer to the
external units operation manual. This section
provides information on external unit opera-
tions with the navigation system that differ
from those described in the external units op-
eration manual.
p Operation varies depending on the external
unit connected. (In some cases, the exter-
nal unit may not respond.)
Reading the screen
3
12
1 Source icon
Shows which source has been selected.
2 External unit indicator
Displays the information that is sent by con-
nected external units.
3 Auto/Manual mode indicator
Shows the current mode.
Using the touch panel keys
% Touch [EXT1] or [EXT2] on the AV
Sourcemenu to select the external unit.
= For details concerning operations, refer to
Screen switching overview on page 34.
2
4
5
3
1
76
1 Send a band command
Touchto send a band command to the ex-
ternal unit.
p Operation varies depending on the exter-
nal unit connected. (In some cases, the
external unit may not respond.)
2 Recall equalizer curves
= For details, refer to Recalling equalizer
curves on page 161.
3 Send an [a], [b], [c],or[d] command
Touchto operate the external unit.
p Operation varies depending on the exter-
nal unit connected. (In some cases,
some functions may not be used until
you touch and hold the key.)
4 Switching between automatic and man-
ual function
You can turn automatic and manual func-
tion on or off.
You can switch between Auto and Manual
functions of the external unit connected.
Initially, this function is set to Auto.
p Operating commands set for Auto and
Manual operations vary depending on
the external unit connected.
5 Display the map screen
6 Send a 1 key to 6 key command
Using the external unit (EXT1, EXT2)
En
142
Chapter
24