Pioneer AVIC-X7115BT GPS Receiver User Manual


 
You can use the navigation system to control
an XM satellite digital tuner, which is sold se-
parately.
For details concerning operation, refer to the
XM tuners operation manuals. This section
provides information on XM operations with
the navigation system which differs from that
described in the XM tuners operation man-
ual.
The following XM satellite digital tuner units
cannot be connected:
GEX-P900XM, GEX-P910XM
Reading the screen
ALL CHMODE
1
2
34
5
9
8
7
6
CATEGORY MODE
5
About the logo for channel name
Only the logo data that is contained in the na-
vigation system can be displayed for each
channel. The logo of a newly established chan-
nel that is not contained cannot be displayed.
When no logo may be displayed, the following
substitute icon is displayed.
Substitute icon
p The icon of each broadcast station is con-
tained in the NAND flash memory based
on the data provided by XM Satellite Radio
as of December 2008.
p Any changes made by XM Satellite Radio
in the lineup or icon of the broadcast sta-
tion in the future may not be supported by
the navigation system, and may cause the
unit to display incorrect icons.
1 Source icon
Shows which source has been selected.
2 XM band indicator
Shows the XM band that has been selected.
3 Preset number indicator
Shows what preset item has been selected.
4 XM channel number indicator
Shows the XM channel number the tuner is
currently tuned to.
5 XM channel category
Shows the category of broadcast channel.
6 XM channel select mode indicator
Shows what channel select mode has been
selected. You can select a channel from all
channels in ALL CH MODE, and select a
channel from selected category in
CATEGORY MODE.
7 XM station name logo
p The message ON THE AIRdisappears
if the navigation system cannot receive
XM tuner reception for some reason.
8 XM station name indicator
Shows the XM broadcast station name the
tuner is currently tuned in.
9 Detail information
Using the XM tuner
En
130
Chapter
21