Pioneer AVIC-X7115BT GPS Receiver User Manual


 
[After 6 seconds]: Answers after six seconds
[After 10 seconds]: Answers after ten sec-
onds
Setting the automatic rejection
function
If this function is on, the navigation system
automatically rejects all incoming calls.
1 Touch [Phone Settings] on the Phone
Menu.
= For details, refer to Displaying the Phone
Menu on page 73.
2 Touch the key next to Refuse All
Calls.
Touching the key activates or deactivates the
function.
p If both Refuse All Callsand Auto An-
swer Preferenceare activated, Refuse
All Callstakes priority and all incoming
calls are automatically rejected.
Echo canceling and noise reduction
When you are operating hands-free phoning
in the vehicle, you may hear an undesirable
echo. This function reduces the echo and
noise while you are using hands-free phoning,
and maintains a certain sound quality.
1 Touch [Phone Settings] on the Phone
Menu.
= For details, refer to Displaying the Phone
Menu on page 73.
2 Touch [Echo Cancel].
Touching [Echo Cancel] switches between
[On] and [Off].
Setting automatic connection
When automatic connection is active, the na-
vigation system will automatically establish a
connection with a registered phone when it
comes into range. Using this feature avoids all
of the processes for establishing a connec-
tion.
p With some cellular phones, it may not be
possible to perform automatic connection.
1 Touch [Phone Settings] on the Phone
Menu.
= For details, refer to Displaying the Phone
Menu on page 73.
2 Touch [Auto Connect].
Touching [Auto Connect] switches between
[On] and [Off].
p Automatic connection is performed in the
registration number order.
p Some cellular phones do not support auto-
matic connection.
Editing the device name
You can change the device name to be dis-
played on your cellular phone. (Default is
[Pioneer Navi].)
1 Touch [Phone Settings] on the Phone
Menu.
= For details, refer to Displaying the Phone
Menu on page 73.
2 Touch [Edit Name].
The keyboard to enter the name appears.
3 Touch
to delete the current name,
and enter the new name by using the key-
board.
4 Touch [Done].
The name is changed.
Using hands-free phoning
En
83
Chapter
08
Using hands-free phoning