Pioneer AVIC-X7115BT GPS Receiver User Manual


 
2 Touch the color you want.
Current color balance
Available options;
! Coloredkeys Selects the desired preset
color
! Memory1/Memory 2/Memory 3 Col-
ors registered in the memory
= For details, refer to Creating a user-de-
fined color and storing it to memory on
this page.
! ScanShifts between the eight default
colors in sequence gradually.
Creating a user-defined color and
storing it to memory
You can create a user-defined color and set it
as the illumination color.
1 Touch [Illumi Color] on the System Set-
tingsmenu.
= For details, refer to Displaying the System
Settingsmenu on page 155.
2 Touch [Custom].
p If [Scan] is set, [Custom] cannot be se-
lected.
3 Touch [+] or [] to adjust the values for
Red, Green and Blue to create a favorite
color.
Watch the illumination of hardware keys while
adjusting the color.
Each time you touch [+]or[] increases or de-
creases the value of the selected item. +31 to
+00 is displayed as the value is increased or
decreased.
p An entry cannot be storedwith all of the va-
lues set to +00.
4 Touch [Memory 1], [Memory 2] or
[Memory 3] to store the illumination color.
5 Touch
to return to the previous
screen.
Checking the version information
1 Touch [Service Information] on the
System Settings menu.
= For details, refer to Displaying the System
Settingsmenu on page 155.
2 Check the version information.
Restore Factory Settings
Resets various settings registered to the navi-
gation system and restores them to the default
or factory settings.
p Some data remains. Read Returning the na-
vigation system to the default or factory set-
tings before you operate this function.
= For more detailed information about the
items which would be erased, refer to
Returning the navigation system to the
default or factory settings on page 175.
Customizing preferences
En
159
Chapter
25
Customizing preferences