Pioneer AVIC-X7115BT GPS Receiver User Manual


 
2 Touch [Loudness] to select the level you
want.
Each time you touch [Loudness], the level is
selected in the following order:
Off Low Mid High
Using subwoofer output
The navigation system is equipped with a sub-
woofer output mechanism, which can be
turned on or off.
p Only when Sub Wooferis [On], you can
adjust Phase, Leveland Frequency.
1 Touch [Sub Woofer] on the AV Sound
Settingsmenu.
= For details, refer to Displaying the AV
Sound Settingsmenu on page 160.
2 Touch [On] to turn subwoofer output
on.
To turn subwoofer output off, touch [Off].
3 Touch [Reverse] or [Normal] to select
the phase of subwoofer output.
4 Touch [+] or [] next to Levelto adjust
the output level.
+6 to 24 is displayed as the level is increased
or decreased.
5 Touch [+] or [] next to Frequencyto
select cut-off frequency.
Each time you touch [+]or[], cut-off frequen-
cies are selected in the following order:
50Hz 63Hz 80Hz 100Hz 125Hz
Only frequencies lower than those in the se-
lected range are output from the subwoofer.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, activate HPF
(high pass filter). Only frequencies higher than
those in the selected range are output from
the front or rear speakers.
1 Touch [HPF] on the AV Sound Settings
menu.
= For details, refer to Displaying the AV
Sound Settingsmenu on page 160.
2 Touch [HPF] to select cut-off frequency.
Each time you touch [HPF] selects cut-off fre-
quencies in the following order:
Off 50 Hz 63 Hz 80 Hz 100 Hz
125 Hz
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
p Settings are based on the FM tuner volume
level, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Touch [SLA] on the AV Sound Settings
menu.
= For details, refer to Displaying the AV
Sound Settingsmenu on page 160.
3 Touch [+] or [] to adjust the source vo-
lume.
+4 to 4 is displayed as the source volume is
increased or decreased.
The following AV sources are set to the same
source level adjustment volume automatically.
! CD,ROM, DivX (for AVIC-X9115BT)
! CD,ROM (for AVIC-X7115BT)
! XMand SIRIUS
! AV1 and AV2
! EXT1and EXT2
Customizing preferences
En
163
Chapter
25
Customizing preferences