Filter
Top Products
“Front:15” to “Rear:15” is displayed as the
front/rear speaker balance moves from front to
rear.
Setting “Front:” and “Rear:” to “0” is correct
when using a two speaker system.
3 Touch [c]or[d] to adjust left/right
speaker balance.
Each time you touch [c]or[d], the left/right
speaker balance moves towards the left or the
right.
Left:15 to Right:15 is displayed as the left/
right speaker balance moves from left to right.
Using the equalizer
The equalizer lets you adjust equalization to
match vehicle interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer curves that
you can easily recall at any time. Here is a list
of the equalizer curves:
Equalizer curve
S.Bass
S.Bass is acurve inwhich only low-pitchedsound is
boosted.
Powerful
Powerful is acurve inwhich low-pitched andhigh-
pitched sounds areboosted.
Natural
Natural is acurve inwhich low-pitched andhigh-
pitched sounds areslightly boosted.
Vocal
Vocal isa curve in whichthe midrange, which isthe
human vocal range,is boosted.
Flat
Flat is aflat curve in whichnothing is boosted.
Custom1
Custom1 is anadjusted equalizer curve thatyou cre-
ate. Aseparate customcurve canbe created for each
source.
Custom2
Custom2 is anadjusted equalizer curve thatyou cre-
ate. If youselect this curve, theeffect is reflected all
AV source.
1 Touch [EQ] on the “AV Sound Settings”
menu.
= For details, refer to Displaying the “AV
Sound Settings” menu on the previous
page.
2 Touch the equalizer you want.
p You can also sequentially select the desired
equalizer curve by touching [EQ] on the AV
operation screen of each source.
Adjusting the equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjustments can be
made with a 3-band parametric equalizer.
The difference between “Custom1” and
“Custom2”
! A separate Custom1 curve can be created
for each source. If you make adjustments
when a curve S.Bass, Powerful, Natural,
Vocal, Flat,orCustom1 is selected, the
equalizer curve settings will be memorized
in Custom1.
! A Custom2 curve can be created common
to all sources. If you make adjustments
when Custom2 curve is selected, the Cus-
tom2 curve will be updated.
! The adjusted Custom1 curve is memorized
for each of the source selected, but one
curve is shared for the following sources.
— CD, ROM, DVD-V, DVD-VR, DivX (for
AVIC-X9115BT)
Customizing preferences
En
161
Chapter
25
Customizing preferences