Nokia 2620 GPS Receiver User Manual


 
Reference
31
route home will appear. Select Yes, and your StreetPilot will then direct you to your HOME location.
To set a HOME Waypoint:
1. Press down and hold the MENU key from your StreetPilot or remote control. A ‘Route Menu’ page
appears. (As an alternative, simply press your StreetPilot’s FIND key two times. Then, go to Step 3 below.)
2. From the ‘Route Menu’ page, select ‘Set HOME Waypoint.’ A ‘Set HOME Waypoint’ page appears.
3. Select one of the three options: Current Location, Use Map, and Find (these options are discussed on
page 29).
4. Once you select an option, fi nd your location using this option. Touch ‘OK’ when you have found your
location. A ‘New Waypoint’ page appears.
5. From the ‘New Waypoint’ page, touch ‘OK.’ Your Home waypoint is set.
At your request, your StreetPilot will create a route for you to go to your HOME
location while you are on the road. Simply press your StreetPilot’s FIND key two
times. A window asking you to verify that you want to route home will appear.
Select Yes, and your StreetPilot will then redirect you to your HOME location.
Changing your HOME Waypoint
If you travel frequently, you may want to change your HOME waypoint to the hotel at the confer-
ence you are attending or to the relative’s house at which you are vacationing. Then, as you explore the
surrounding area, you can use the Route HOME feature to return you to your lodging place. To change
your HOME waypoint, you must fi rst delete the existing HOME waypoint. Do this by pressing FIND from
your StreetPilot, and then selecting the Waypoints icon. Find and select your HOME waypoint. When the
Waypoint Review page appears, touch Delete. Select Yes to confi rm that you really want to delete your HOME
waypoint. Create a new HOME waypoint by following instructions above.
Once you fi nd your location, the New Waypoint page
shown below will appear. It includes the coordinates
of your chosen HOME location. Touch OK to accept
the location.
Get to the Route Menu page shown above by
pressing and holding down the MENU key from
your StreetPilot. A Set Home Waypoint window will
appear, as shown below.
Creating Routes
190-00342-00_0A.indd 31 4/13/2004, 9:56:56 AM