Filter
Top Products
PiN 570 | User Manual
18
7. Starting Your PiN
1.
Check the Hard Reset switch on the bottom of the PiN. If this is in the left position, remove
the stylus and use it to set it to the right and set up your PiN for use.
2.
Press the Power button
on the left side of the PiN
The PiN will turn on. The first time you use your PiN, you will be prompted to set up your
Pocket PC.
On subsequent occasions, the Today screen will display.
3.
Gently pull the bottom of the GPS receiver away from the PiN and lift it out to a horizontal
position so that it can obtain a GPS fix.
Starting Smart
S
Whether you travel in your own country or elsewhere, Smart
S
will direct you to your
destination without the need for map books and second-hand instructions. The Global
Positioning System (GPS) is available free of charge, at any time, and is accurate to within 5 m
(15 ft). Your Smart
map provides street-level detail for door-to-door navigation, including Points
Of Interest (POIs) such as accommodation, railway stations and airports.
1.
To open Smart
S
, press the Smart
S
button
on the front of the PiN.
2.
The Language Selection screen will display on PiN 570s
purchased outside of Australia,
Canada, New Zealand or United States, the first time you open Smart
S
.
•
Tap the language name or associated flag icon, then tap
.
3.
The Legal Notice screen will display. Read the legal notice and tap
I Agree
to confirm you
understand.
4.
The Tutorial will display. Tap
to move through the screens.
The 2D Map screen will open.
For more information about Smart
S
, see the Smart
S
2005 for Pocket PC User Manual.