Filter
Top Products
G
Warning!
Wiper blades are components that are subject
to wear and tear. Replace the wiper blades
twice a year, preferably in the spring and fall.
Otherwise the windshield will not be wiped
properly. As a result, you may not be able to
observe surrounding traffic conditions and
could cause an accident.
!
To avoid damage to the hood, the wiper
arms should only be folded forward when
in the vertical position.
!
Never open the hood when a wiper arm is
folded forward.
Hold on to the wiper when folding a wiper
arm back. If released, the force of the
impact from the tensioning spring could
crack the windshield.
Do not allow a wiper arm to contact the
windshield glass without a wiper blade
inserted.
Mercedes-Benz recommends that you have
this work carried out at an authorized
Mercedes-Benz Center.
Placing wiper arms in vertical position
:
Wiper arms in vertical position
X
Make sure the hood is fully closed.
X
Make sure the vehicle’s on-board
electronics have status 1.
X
Turn the combination switch to wiper
setting °.
X
Press the KEYLESS-GO start/stop button
repeatedly until the windshield wipers
start.
X
Press the KEYLESS-GO start/stop button
when the wiper arms are in vertical
position :.
Removing wiper blades
!
Do not pull on the wiper blade inserts.
They could tear.
X
Fold the wiper arm forward until it snaps
into place.
X
Turn the wiper blade at a right angle to
wiper arm.
X
Slide the wiper blade sideways out of the
retainer.
Installing wiper blades
X
Slide the wiper blade onto the wiper arm
until it locks in place.
X
Rotate the wiper blade into a position
parallel to the wiper arm.
X
Fold the wiper arm backward to rest on the
windshield.
Make sure you hold on to the wiper when
folding the wiper arm back.
!
Make sure the wiper blades are installed
properly. Improperly installed wiper blades
may cause windshield damage.
Replacing wiper blades
401
Practical hints
BA 197 USA, CA Edition A 2011; 1; 27, en-US
hereepe Version: 3.0.3.5
2010-03-24T15:31:10+01:00 - Seite 401
Z