Filter
Top Products
Operating Voice Control
1
Multifunction display
2
x Mute, X decreases the volume, W increases the volume
3
? Activates voice control
?
% Cancels voice control
Starting the Dialog
X
Switch on the ignition (see the vehicle
Operator's Manual).
i
After the ignition has been switched on, it
takes about 30 seconds for the voice
control system to be ready for operation.
During this period the message Loading
Speech Data is displayed.
X
Press the ? button.
An acoustic signal confirms that the dialog
has been started.
X
Give a command.
Interrupting the Dialog
If a list appears on the display, you can use
the “Pause” command to interrupt the dialog.
You can then select an entry using the
COMAND controller.
To resume the dialog with voice control, press
the ? button on the multifunction steering
wheel.
Canceling the Dialog
X
Press the % button.
or
X
Say the command Cancel (except when
creating and storing voice tags, navigation
entries or during individualization).
or
X
Press any button on COMAND.
Adjusting the Volume
X
Start the dialog.
X
Give a command, e.g. Help.
208
Voice Control
COMAND APS
BA 197 USA, CA Edition A 2011; 1; 27, en-US
hereepe Version: 3.0.3.5
2010-03-24T15:31:10+01:00 - Seite 208