Filter
Top Products
X
To reject: Select Reject.
or
X
Press the I button on the COMAND
control panel or the ~ button on the
multifunction steering wheel.
X
To accept: Select Accept.
or
X
Press the K button on the COMAND
control panel or the 6 button on the
multifunction steering wheel.
After accepting the call, you will conduct the
conversation over the hands-free system. The
call volume can be adjusted (Y page 89).
Please see the “Functions during a Single
Call” section for other functions
(Y page 160).
i
You can also accept a call as described
above when COMAND is showing a display
of a different main application. The display
switches to the telephone display after you
accept the call. After the call is finished,
you see the display of the previous main
application again.
Initiating an Outgoing Call
Entering a Phone Number via the
COMAND Control Unit
X
Open the phone main menu (Y page 152).
X
Enter all the digits on the numeric keypad
one after the other.
X
To delete individual digits: Press briefly
the CLR button on the COMAND control
unit.
X
To delete an entire phone number: Press
and hold the CLR button until the number
is deleted.
X
To place a call: Press the K button on the
COMAND control panel or press the 6
button on the multifunction steering wheel.
Entering a Phone Number from the
COMAND Controller
X
Open the phone main menu (Y page 152).
X
To enter digits: Select the required digits
in sequence.
X
To delete individual digits: Select õ
and briefly press the n button.
or
X
Press the 2 button next to the
COMAND controller.
X
To delete an entire phone number:
Select õ and press n until the phone
number has been deleted.
or
X
Press and hold down the 2 button next
to the COMAND controller until the entire
entry is deleted.
X
To connect a call: Select ° at the bottom
right-hand side of the input speller.
or
X
Press the K button on the COMAND
control panel or the 6 button on the
multifunction steering wheel.
Redialing
X
Open the phone main menu (Y page 152).
X
Select ° at the bottom right-hand side of
the input speller.
or
X
Press the K button on the COMAND
control unit when the phone main menu is
displayed.
The dialed calls list appears. The call dialed
last will be at the top of the list.
X
To select a call: Rotate y m z or slide
q m r
X
To initiate call: Press n.
Telephone
159
COMAND APS
BA 197 USA, CA Edition A 2011; 1; 27, en-US
hereepe Version: 3.0.3.5
2010-03-24T15:31:10+01:00 - Seite 159
Z