Filter
Top Products
X
To remove jack C from storage well casing
E, loosen hook and loop fastener D.
X
Remove jack C with storage well casing
E.
F
Fuse chart
G
Wheel wrench
H
Towing eye bolt
Collapsible wheel chock
The collapsible wheel chock serves to secure
the vehicle, e.g. while changing a wheel.
X
Take the collapsible wheel chock from the
vehicle tool kit (Y page 362).
X
Setting up: Tilt both plates upward :.
X
Fold the lower plate outward ;.
X
Guide the tabs of the lower plate all the way
into the openings of base plate =.
For information on where to place wheel
chocks when changing a wheel, see
“Preparing the vehicle” (Y page 405).
Jack
G
Warning!
Only use the jack supplied with your vehicle
to lift the vehicle briefly for wheel changes. If
you use the jack for any other purpose, you or
others could be injured, as the jack is
designed only for the purpose of changing a
wheel.
When using the jack, observe the safety notes
in the “Removing the wheel” section and the
notes on the jack.
X
Take the jack from the vehicle tool kit
(Y page 362).
Storage position
X
Turn the crank handle in the direction of
arrow as far as it will go.
Operational position
X
Turn the crank handle clockwise.
Where will I find...?
363
Practical hints
BA 197 USA, CA Edition A 2011; 1; 27, en-US
hereepe Version: 3.0.3.5
2010-03-24T15:31:10+01:00 - Seite 363
Z