Filter
Top Products
i
You can still operate your phone using the
keypad.
Commands
“Phone”
Use the “Phone” command to select the
phone application. Use this command if you
wish the digits entered to be shown on the
display.
“Help Phone”
Voice control has an extensive help function.
Using the “Help Phone” command, you can
have all the essential commands for the
phone read out (Y page 226).
“Dial number”
You can use the “Dial number” command to
dial a phone number.
The digits 0 to 9 and the word “Plus” are
permitted.
“Plus” replaces the international dialing code,
e.g. “00”.
Say the phone number in the form of a
continuous string of digits or as blocks of
digits, e.g. three to five digits.
Voice control repeats the digits it recognizes
after each block of digits (with a pause of
about half a second between each block of
digits) and waits for you to continue speaking.
Example of dialog:
s
Dial number
t
Please say the number
s
Zero one three zero
t
Zero one three zero
s
Five zero zero five
t
Five zero zero five
s
Okay
t
Dialing number
i
You can also dial the specified number if
you press the 6 button on the multi-
function steering wheel instead of the
concluding command “Okay”.
“Confirm”
While you are entering a number, you can use
the “Confirm” command to have all the
spoken digits repeated by voice control.
Voice control will then prompt you to
continue with the entry.
Example of dialog:
s
Dial number
t
Please say the number
s
Zero one three zero
t
Zero one three zero
s
Confirm
t
Zero one three zero. Please continue.
s
Five zero zero five
t
Five zero zero five
s
Okay
t
Dialing number
i
You can also dial the specified number if
you press the 6 button on the multi-
function steering wheel instead of the
concluding command Okay.
“Correction”
While you are entering a number, you can use
the “Correction” command to correct the
block of digits last spoken. When you input
this command, voice control deletes the last
block of digits and repeats the digits input up
to this point. Voice control will then prompt
you to continue with the entry.
Example of dialog:
s
Dial number
t
Please say the number
s
Zero one three zero
t
Zero one three zero
s
Five zero zero five
t
Five zero zero five
s
Correction
t
Zero one three zero. Please continue.
s
Five zero zero five
t
Five zero zero five
210
Voice Control
COMAND APS
BA 197 USA, CA Edition A 2011; 1; 27, en-US
hereepe Version: 3.0.3.5
2010-03-24T15:31:10+01:00 - Seite 210