Filter
Top Products
X
Press button : or 9 to select Yes or
No. Select Yes if you want to reset to
factory settings.
X
Press button a to confirm.
The confirmation message appears in the
multifunction display.
Submenus in the Settings menu
X
Press button = or ; to select the
Settings menu.
X
Press button : or 9 to select a
submenu.
X
Scroll down with button :, scroll up
with button 9.
With the selection marker on the desired
submenu, use the button a to access the
individual functions within that submenu.
Once within the submenu, you can use button
9 to move to the next function or
button : to move to the previous function
within that submenu.
The following lists show what settings can be
changed within the various menus. Detailed
instructions on making individual settings can
be found on the following pages.
Instrument cluster submenu
R
Selecting speedometer display mode
(Y page 283)
R
Permanent display (speed display or
outside temperature) (Y page 283)
Lights submenu
R
Switching daytime running lamp mode on
or off (USA only) (Y page 284)
R
Adjusting illumination brightness for
display and switches (Y page 285)
R
Switching locator lighting on or off
(Y page 285)
R
Switching interior lighting delayed shut-off
on or off (Y page 286)
Vehicle submenu
R
Switching acoustic lock feedback on or off
(Y page 286)
Convenience submenu
R
Activating easy-entry/exit feature
(Y page 245)
R
Switching fold-in function for exterior rear
view mirrors on or off (Y page 287)
Instrument cluster submenu
Access the Instr. Cluster submenu via
the Settings menu. Use the Instr.
Cluster submenu to change the instrument
cluster display settings.
The following functions are available:
R
Selecting speedometer display mode
(Y page 283)
R
Permanent display (speed display or
outside temperature) (Y page 284)
Selecting speedometer display mode
X
Press = or ; to select the
Settings menu.
X
Press button : or 9 to select the
Instr. Cluster submenu.
X
Press button a.
X
Press button : or 9 to select the
Display Unit Speed-/Odometer:
function.
The current setting is shown.
Control system
283
Controls in detail
BA 197 USA, CA Edition A 2011; 1; 27, en-US
hereepe Version: 3.0.3.5
2010-03-24T15:31:10+01:00 - Seite 283
Z