Filter
Top Products
Vehicle status messages in the multifunction display
314
Tires
Display messages Possible cause/consequence Possible solution
Check,
Tire Pressure
(Canada only)
Then Restart
Run Flat Indicator
There has been a warning message about
a loss in the tire inflation pressure and the
Run Flat Indicator was not restarted yet.
X
Make sure the correct tire inflation pressure is
set for each tire.
X
Then restart the Run Flat Indicator
(Y page 269).
Run Flat
Indicator
(Canada only)
Inoperative
The Run Flat Indicator is malfunctioning.
X
Have the Run Flat Indicator checked at an
authorized Mercedes-Benz Center.
Check
(Canada only)
Tire Pressure Soon
The Run Flat Indicator indicates that the
pressure is too low in one or more tires.
X
Carefully bring the vehicle to a halt, avoiding
abrupt steering and braking maneuvers.
Observe the traffic situation around you.
X
Check the tires and, if necessary, change the
wheel (Y page 360).
X
Check and adjust tire inflation pressure as
required (Y page 268).
X
Restart the Run Flat Indicator after adjusting
the tire inflation pressure values
(Y page 269).
Tire Press.
Monitor
(USA only)
Inoperative
The TPMS is malfunctioning.
X
Have the TPMS checked at an authorized
Mercedes-Benz Center.
Practical hints