Filter
Top Products
Panorama roof with power tilt/sliding panel
226
Panorama roof with power tilt/sliding
panel
Extending and retracting the roller
sunblinds
The roller sunblinds only operate with the tilt/
sliding panel closed. The front and rear roller
sunblind cannot be operated individually.
G
Warning!
When extending the roller sunblinds, make
sure no one is in danger of being injured by
the extending procedure.
The roller sunblinds are equipped with the
express operation and automatic reversal
function. If the movement of the roller
sunblinds is blocked during the extending
procedure, the roller sunblinds will stop and
retract slightly.
The extending of the roller sunblinds can be
immediately halted by releasing the roof
panel switch or, if the roof panel switch was
moved past the resistance point and
released, by moving the roof panel switch
in any direction.
Roof panel switch
1
Retracting
2
Retracting
3
Extending
X
Switch on the ignition.
X
Retracting/Extending: Move the roof
panel switch to the resistance point in the
required direction of arrow 1, 2 or 3
until the roller sunblinds have reached their
desired position.
X
Express operation: Move the roof panel
switch past the resistance point in
direction of arrow 1, 2 or 3 and release.
The roller sunblinds retract/extend
completely.
X
Stopping during express operation:
Move the roof panel switch in any direction.
Opening and closing the panorama
roof with power tilt/sliding panel
G
Warning!
When opening or closing the tilt/sliding
panel, make sure there is no danger of
anyone being harmed by the opening/
closing procedure.
The tilt/sliding panel is equipped with the
express operation and automatic reversal
function. If the movement of the tilt/sliding
panel is blocked during the closing
procedure, the tilt/sliding panel will stop
and open slightly.
The tilt/sliding panel operates differently
when the roof panel switch is pressed and
held. See the “Closing when the tilt/sliding
Controls in detail