Mercedes-Benz 2009 C350 Sport Automobile User Manual


 
Control system
144
need to search through your entire phone
book.
X
Press button ( or & to select the
Tel menu.
X
Press button s.
X
Press button % or $ to select the
desired number and/or name.
X
Press button s or #.
The control system dials the selected
phone number.
Service menu
In the Service menu the following functions
are available:
R
Calling up messages (Y page 144)
R
Restarting the TPMS (USA only)
(Y page 272)
R
Restarting the Run Flat Indicator (Canada
only) (Y page 270)
R
Calling up the maintenance service
indicator display (Y page 292)
Calling up vehicle malfunction, warning
and system status messages stored in
memory
Use the vehicle status message memory
function to scan malfunction and warning
messages that may be stored in the system.
Such messages appear in the multifunction
display and are based on conditions or
system status the vehicle’s system has
recorded.
G
Warning!
Malfunction and warning messages are
only indicated for certain systems and are
intentionally not very detailed. The
malfunction and warning messages are
simply a reminder with respect to the
operation of certain systems. They do not
replace the owner’s and/or driver’s
responsibility to maintain the vehicle’s
operating safety. Have all required
maintenance and safety checks performed
on the vehicle. Bring the vehicle to an
authorized Mercedes-Benz Center to
address the malfunction and warning
messages.
X
Press ( or & to select the Service
menu.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:
X
Press % or $ to select the
messages function.
X
Press # to confirm.
The stored messages will now be displayed
in the order in which they have occurred.
For malfunction and warning messages,
see “Vehicle status messages in the
multifunction display” (Y page 305).
X
Use % or $ to scroll through the
messages.
If you turn the SmartKey in the starter switch
to position 0 and then back to position 2, all
messages will be deleted from the message
memory.
Controls in detail